Centering, front and back
Opposite borders are compared on both sides of the card, because PSA grades the back too and a perfect front can still lose a 10.
Upload the front and back of a Pokémon card and get a predicted PSA grade on PSA's own 1–10 scale, four subgrades, a confidence level per axis, and the one flaw holding the grade down. About a minute, no card shipped.
Updated
Even light, no glare, card filling the frame. If glare or blur hides part of the card, that axis comes back with low confidence, and if two of the four axes can't be assessed the credit goes back.
It identifies the card's era from the design and copyright line, so vintage cards are judged against realistic expectations.
Centering, corners, edges and surface are each scored on PSA's scale with a high, mid or low confidence, using the most severe visible defect on each axis.
The report names the flaw that caps the grade. Submit cards predicted 9 or 10 with good confidence when the value gap clearly beats PSA's fee, and skip the rest.
The same four things PSA looks at, each scored and each with a stated confidence.
Opposite borders are compared on both sides of the card, because PSA grades the back too and a perfect front can still lose a 10.
Whitening, fraying, rounding and chipping are checked on every corner and all four edges, with extra attention to the back edges where specks hide.
Scratches, print lines, dents, creases, stains and holo scratching, judged at the most severe flaw, not the average.
The grader reads the era from the card's design and copyright line. Vintage WOTC-era cards very rarely reach a 9 or 10 after decades of aging, so the prediction reflects that instead of flattering the card.
If glare, blur or a sleeve hides part of the card, that axis comes back marked low confidence. If two or more axes can't be assessed, the credit goes back to you.
Every report names the axis that caps the grade and the specific defect behind it, so you know what to look at under a loupe before paying PSA.
Every grading tool works from the same limit: a flat photo is not a card in your hand. Knowing which axes survive that limit tells you how much weight to put on each subgrade.
| Axis | Photo reliability | Check by hand if the report says |
|---|---|---|
| Centering | High. Borders are measurable from a straight-on photo. | Mid or low confidence on a full-art or borderless card, where there is no clear border to measure. |
| Corners | High to mid. Whitening and rounding show at the tips. | Corners near the limit of a 9 or 10: look under a loupe. |
| Edges | Mid. Silvering on holo borders and chips on dark borders are visible, tiny nicks are not. | Any edge flagged light or moderate whitening on the back. |
| Surface | Lowest. Light scratches, dents and print lines often need raking light to see. | A predicted 9 or 10 where surface is the highest-valued axis. Tilt the card in a lamp before you submit. |
Vintage (WOTC-era and older). Paper aging means corners, edges and surface rarely look pristine. A predicted 5 to 7 on a vintage card in good shape is normal; treat a predicted 9 as something to verify twice, especially on 1st Edition cards where the value gap between a 7 and a 9 is large.
Modern holos and alt arts. Pack-fresh modern cards commonly land in the 8 to 10 range, so the question becomes whether centering or a hairline surface scratch holds the card at an 8 or 9. That is where the grade-limiting axis in the report earns its place.
Full-art and borderless cards. With no visible border, centering is the hardest axis to call. If its confidence is low, measure it yourself using the method in how to pre-grade Pokémon cards.
Japanese cards. They are graded on the same four axes and the same scale. Centering and edges are usually what decide them; see the Japanese Pokémon card grading guide.
Not sure which tool to use? See the best AI Pokémon card grading apps compared, or the head-to-heads with PreGradeCards, CardMintAI and PokeGrade.
Sign up free, 1 free credit, result in about a minute. No subscription, no card needed.